Pre-Filled Peptide Nasal Sprays — Ready to Use
Available now. Every nasal spray arrives pre-filled and ready to use — no mixing required.
Select Pre-filled Nasal Spray as the format on any eligible product page and we prepare the bottle for you. Every batch is independently HPLC tested at ≥98% purity and dispatched from our UK facility. Strictly for in-vitro research use only — not for human use.
Order a pre-filled nasal spray
How to order
- Open the product page for the peptide you want.
- Choose Pre-filled Nasal Spray under the format options — the all-in price is shown.
- Add to basket and check out. We prepare and label the bottle before dispatch.
How to administer the nasal spray
The instructions below describe the standard handling technique used in laboratory and research settings. Every bottle is labelled with the exact fill volume, spray count and strength per spray for that product.
- Prepare the bottle. Keep the spray refrigerated upright at 2–8°C. Before use, let it sit at room temperature for about a minute. Do not shake — gentle swirling is enough if the liquid has settled.
- Prime the pump. Remove the cap and press the pump 2–3 times into the air until a fine mist appears. This ensures the dip tube is full and each subsequent spray delivers the correct volume.
- Position the nozzle. Blow your nose gently if needed. Tilt your head slightly forward (not back). Insert the nozzle just inside one nostril, no deeper than the first quarter of the tip. Aim the nozzle slightly outward, toward the ear, not toward the centre of the nose.
- Administer the spray. Close the opposite nostril with a finger. Press the pump firmly once while breathing in slowly and gently through the nose. Sniff only lightly — hard sniffing pulls the liquid down the throat.
- Repeat if required. If your research protocol calls for more than one spray, alternate nostrils where possible. Wait 30–60 seconds between sprays.
- Clean and store. Wipe the nozzle with a clean tissue or alcohol swab, replace the cap, and return the bottle to the fridge upright. Use within 2–4 weeks of opening.
Important research-use notice
These sprays are prepared and supplied strictly for in-vitro research use only — not for human use. The handling guide is provided as a laboratory reference and does not constitute medical, dosing or administration advice.
Storage & handling
- Keep refrigerated at 2–8°C, upright and away from light.
- Let the bottle sit at room temperature for a minute before use.
- Use within 2–4 weeks of opening.
- Do not freeze, and do not top up or refill the bottle.
UK dispatch & discreet delivery
Every order ships from our UK facility with Royal Mail 24-hour tracked delivery in plain unbranded packaging. Card payments are processed through a secure, encrypted gateway with 3-D Secure.
Browse related products
View full shopFrequently asked questions
Do I need to mix anything?
No. Our nasal sprays arrive pre-filled and ready to use — no reconstitution, no bacteriostatic water, no measuring. Just remove the cap and prime the pump.
Which peptides are available as a nasal spray?
MT-2, PT-141, Selank, Semax, Adamax, DSIP, Glutathione and NAD+. Choose the Pre-filled Nasal Spray format on the product page.
How much does the nasal spray format cost?
The pre-filled nasal spray is £10 on top of the vial price, and that price is shown in full on the product page before you add it to your basket.
How much does each spray deliver?
Our pumps deliver approximately 0.12 ml per spray in the 10 ml bottles and roughly 0.14 ml per spray in the 30 ml bottles. Every 10 ml bottle contains a 6 ml fill (≈50 sprays); the 30 ml light-sensitive brown bottles for Glutathione and NAD+ contain a 15 ml fill (≈110 sprays). The exact fill volume, spray count and strength per spray is printed on the bottle label for the product you order.
How do I actually use the nasal spray?
Refrigerate upright, then let the bottle sit at room temperature for a minute. Prime the pump with 2–3 sprays into the air. Tilt your head slightly forward, insert the nozzle just inside one nostril, aim slightly outward toward the ear, and press the pump while breathing in gently. Repeat in the other nostril if your protocol calls for more than one spray. Wipe the nozzle and recap. Full instructions are shown on the nasal sprays page.
How should I store it?
Keep the bottle upright in the fridge at 2–8°C, away from light. Let it come to room temperature for a minute before use.
How long does a bottle last?
Once opened, use within 2–4 weeks and keep it refrigerated between uses.
Is it in stock?
Yes — the pre-filled nasal spray format is available now on every eligible product and ships from our UK facility with Royal Mail 24-hour tracked delivery.
Disclaimer: All products sold by Peptides UK 4U are for laboratory and research purposes only. They are not intended for human or animal consumption, diagnosis, treatment or prevention of any disease.